Piston Rings
since 1947
Materials
Cast iron acc.to ISO 6621-3:
Class 10 - Subclass MC12
Class 10 - Subclass MC13
Class 20 - Subclass MC24
Class 30 - Subclass MC32
Class 50 - Subclass MC52
Technology
Non-circular shaped single cast blanks
Double Oval turning machining
Dimensions range
Diameter (ISO d1): 26 - 150 mm
Ring width (ISO h1): from 0.8 mm
Treatment and coatings
Hard Chrome coating on outside surface diameter.
Mn Phosphate
Applications
2-strokes and 4-strokes different applications: Motorcycles, Vintage bikes and racing, Gardening Forestry engines (chainsaws, brushcutters), Construction engines (cut off saws, concrete saws), racing and power engines (Go-karts , Off-road bikes L-shaped rings), Flying engines, Agriculture engines (tractors, lawnmowers, motorhoes, generators), Racing and Vintage cars, and several custom applications designed and build on customers' purposes
Design
Piston rings are designed with an on-purpose software for the calculation of correct working parameters and raw material models.
Wide range of products
Caber produces a wide range of types and dimensions in different materials, to meet a large market demand.
Low-emissions
Optimized design for low blow-by and reduced oil consumption with the aim to meet legal emissions standards.
Materials
Cast iron acc.to ISO 6621-3:
Class 10 - Subclass MC12
Class 10 - Subclass MC13
Class 20 - Subclass MC24
Class 30 - Subclass MC32
Class 50 - Subclass MC52
Technology
Non-circular shaped single cast blanks
Double Oval turning machining.
Dimensions range
Diameter (ISO d1): 20 - 150 mm
Ring width (ISO h1): from 0.8 mm
Treatments and coatings
Manganese Phosphate
Hard Chrome on Periphery
Applications
Air compressors, Air conditioning and refrigeration compressors, Sanding systems for trains, high pressure, breathing air (for scuba diving), firefighting, technical gasses, CNG, dental compressors.
Design
Piston rings are designed with an on-purpose software for the calculation of correct working parameters and raw material models.
No Run-in
All rings lapped on outside diameter with no need of run-in of the compressor at starting phase.
Low oil and low friction
Immediate reduced oil consumption and low-friction from the starting phases.
Materials
Cast iron acc.to ISO 6621-3:
Class 10 - Subclass MC12
Class 10 - Subclass MC13
Class 20 - Subclass MC24
Class 30 - Subclass MC32
Class 50 - Subclass MC52
Technology
Non-circular shaped single cast blanks
Double Oval turning machining.
Dimensions range
Diameter (ISO d1): 20 - 150 mm
Treatments and coatings
Manganese Phosphate
Design
Piston rings are designed with an on-purpose software for the calculation of correct working parameters and raw material models.
100% Light Tight
Fixtures and tools designed by Caber to perform perfect joint milling and complex shapes.
Materials
Cast iron acc.to ISO 6621-3:
Class 10 - Subclass MC12
Class 10 - Subclass MC13
Class 20 - Subclass MC24
Class 30 - Subclass MC32
Technology
Non-circular shaped single cast blanks
Double Oval turning machining.
Dimensions range
Diameter (ISO d1): from 20 mm
Ring width (ISO h1): from 1 mm
Treatments and coatings
Manganese Phosphate
Hard Chrome on Periphery
Applications
Mobile hydraulics (agriculture, construction, material handling), industrial hydraulic applications, air compressors, shock absorbers, transmissions, steering systems and rotary pistons systems.
Small combustion engines.
Design
Piston rings are designed with an on-purpose software for the calculation of correct working parameters and raw material models.
100% Light Tight
Fixtures and tools designed by Caber to perform perfect joint milling and complex shapes.
5000+ different types of finished rings available in stock.
This is our flexibility.